Loading... Please wait...

  • Cart
  • (0 items)
  • $00.00
  • 
The module is based on a touch-sensing IC  (TTP223B) capacitive touch switch module. In the normal state, the module output  low, low power consumption; When a finger touches the corresponding position,  the module output high, if not touched for 12 seconds, switch to low-power mode.
Jog type : the initial state is low , high  touch , do not touch is low ( similar touch of a button feature )
Module can be installed in such as surface  plastic, glass of non-metallic materials
In addition to the thin paper ( non-metallic )  covering the surface of the module , as long as the correct location of the  touch , you can make hidden in the walls, desktops and other parts of buttons

Features:
Low power consumption
Power supply for 2 ~ 5.5V DC
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy  installation
 

Specification:
Item	

Min
	

Typical
	

Max
	

Unit
Power supply voltage VCC	

2.0
	

3
	

5.5
	

V
Output high VOH	

-
	

0.8VCC
	

-
	

V
Output low VOL	

-
	

-
	

0.3VCC
	

V
Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V)	

-
	

8
	

-
	

mA
Output pin pull-up current (@ VCC = 3V, VOH = 2.4V)	

-
	

4
	

-
	

mA
Response time (low power mode)	

-
	

-
	

220
	

mS
Response time (touch mode)	

-
	

-
	

60
	

mS
Size	

24x24x7.2
	

mm

Touch Sensor Interface :(the last picture show)

-Control Interface : A total of three pins (GND,  VCC, SIG), GND to ground , VCC is the power supply , SIG digital signal output  pin ;

-Power Indicator : Green LED, power on the right that is shiny ;

-Touch area : Similar to a fingerprint icon inside the area , you can touch the  trigger finger .

-Positioning holes : 4 M2 screws positioning hole diameter is 2.2mm, the  positioning of the module is easy to install , to achieve inter- module  combination 

 Download


Shipping

    Fast Australia Wide Shipping 
    Processing is 1 Business Day. In most cases orders paid before 2PM AEST on a business day will ship the same day.
    Items are shipping from Melbourne, Victoria
    You are responsible for providing a current and valid address.

Payment

    Only Paypal is accepted as payment.The easiest way to send and accept payments. We will process your order once payment has been confirmed in our account.
    If you are unhappy with the item for ANY reason within the first 14 days, we offer you a full money back guarantee (minus post and packing) after we have recieved the returned item. Contact us should this occur.




The module is based on a touch-sensing IC  (TTP223B) capacitive touch switch module. In the normal state, the module output  low, low power consumption; When a finger touches the corresponding position,  the module output high, if not touched for 12 seconds, switch to low-power mode.
Jog type : the initial state is low , high  touch , do not touch is low ( similar touch of a button feature )
Module can be installed in such as surface  plastic, glass of non-metallic materials
In addition to the thin paper ( non-metallic )  covering the surface of the module , as long as the correct location of the  touch , you can make hidden in the walls, desktops and other parts of buttons

Features:
Low power consumption
Power supply for 2 ~ 5.5V DC
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy  installation
 

Specification:
Item	

Min
	

Typical
	

Max
	

Unit
Power supply voltage VCC	

2.0
	

3
	

5.5
	

V
Output high VOH	

-
	

0.8VCC
	

-
	

V
Output low VOL	

-
	

-
	

0.3VCC
	

V
Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V)	

-
	

8
	

-
	

mA
Output pin pull-up current (@ VCC = 3V, VOH = 2.4V)	

-
	

4
	

-
	

mA
Response time (low power mode)	

-
	

-
	

220
	

mS
Response time (touch mode)	

-
	

-
	

60
	

mS
Size	

24x24x7.2
	

mm

Touch Sensor Interface :(the last picture show)

-Control Interface : A total of three pins (GND,  VCC, SIG), GND to ground , VCC is the power supply , SIG digital signal output  pin ;

-Power Indicator : Green LED, power on the right that is shiny ;

-Touch area : Similar to a fingerprint icon inside the area , you can touch the  trigger finger .

-Positioning holes : 4 M2 screws positioning hole diameter is 2.2mm, the  positioning of the module is easy to install , to achieve inter- module  combination 

 Download


Shipping

    Fast Australia Wide Shipping 
    Processing is 1 Business Day. In most cases orders paid before 2PM AEST on a business day will ship the same day.
    Items are shipping from Melbourne, Victoria
    You are responsible for providing a current and valid address.

Payment

    Only Paypal is accepted as payment.The easiest way to send and accept payments. We will process your order once payment has been confirmed in our account.
    If you are unhappy with the item for ANY reason within the first 14 days, we offer you a full money back guarantee (minus post and packing) after we have recieved the returned item. Contact us should this occur.






The module is based on a touch-sensing IC  (TTP223B) capacitive touch switch module. In the normal state, the module output  low, low power consumption; When a finger touches the corresponding position,  the module output high, if not touched for 12 seconds, switch to low-power mode.
Jog type : the initial state is low , high  touch , do not touch is low ( similar touch of a button feature )
Module can be installed in such as surface  plastic, glass of non-metallic materials
In addition to the thin paper ( non-metallic )  covering the surface of the module , as long as the correct location of the  touch , you can make hidden in the walls, desktops and other parts of buttons

Features:
Low power consumption
Power supply for 2 ~ 5.5V DC
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy  installation
 

Specification:
Item	

Min
	

Typical
	

Max
	

Unit
Power supply voltage VCC	

2.0
	

3
	

5.5
	

V
Output high VOH	

-
	

0.8VCC
	

-
	

V
Output low VOL	

-
	

-
	

0.3VCC
	

V
Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V)	

-
	

8
	

-
	

mA
Output pin pull-up current (@ VCC = 3V, VOH = 2.4V)	

-
	

4
	

-
	

mA
Response time (low power mode)	

-
	

-
	

220
	

mS
Response time (touch mode)	

-
	

-
	

60
	

mS
Size	

24x24x7.2
	

mm

Touch Sensor Interface :(the last picture show)

-Control Interface : A total of three pins (GND,  VCC, SIG), GND to ground , VCC is the power supply , SIG digital signal output  pin ;

-Power Indicator : Green LED, power on the right that is shiny ;

-Touch area : Similar to a fingerprint icon inside the area , you can touch the  trigger finger .

-Positioning holes : 4 M2 screws positioning hole diameter is 2.2mm, the  positioning of the module is easy to install , to achieve inter- module  combination 

 Download


Shipping

    Fast Australia Wide Shipping 
    Processing is 1 Business Day. In most cases orders paid before 2PM AEST on a business day will ship the same day.
    Items are shipping from Melbourne, Victoria
    You are responsible for providing a current and valid address.

Payment

    Only Paypal is accepted as payment.The easiest way to send and accept payments. We will process your order once payment has been confirmed in our account.
    If you are unhappy with the item for ANY reason within the first 14 days, we offer you a full money back guarantee (minus post and packing) after we have recieved the returned item. Contact us should this occur.





The module is based on a touch-sensing IC  (TTP223B) capacitive touch switch module. In the normal state, the module output  low, low power consumption; When a finger touches the corresponding position,  the module output high, if not touched for 12 seconds, switch to low-power mode.
Jog type : the initial state is low , high  touch , do not touch is low ( similar touch of a button feature )
Module can be installed in such as surface  plastic, glass of non-metallic materials
In addition to the thin paper ( non-metallic )  covering the surface of the module , as long as the correct location of the  touch , you can make hidden in the walls, desktops and other parts of buttons

Features:
Low power consumption
Power supply for 2 ~ 5.5V DC
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy  installation
 

Specification:
Item	

Min
	

Typical
	

Max
	

Unit
Power supply voltage VCC	

2.0
	

3
	

5.5
	

V
Output high VOH	

-
	

0.8VCC
	

-
	

V
Output low VOL	

-
	

-
	

0.3VCC
	

V
Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V)	

-
	

8
	

-
	

mA
Output pin pull-up current (@ VCC = 3V, VOH = 2.4V)	

-
	

4
	

-
	

mA
Response time (low power mode)	

-
	

-
	

220
	

mS
Response time (touch mode)	

-
	

-
	

60
	

mS
Size	

24x24x7.2
	

mm

Touch Sensor Interface :(the last picture show)

-Control Interface : A total of three pins (GND,  VCC, SIG), GND to ground , VCC is the power supply , SIG digital signal output  pin ;

-Power Indicator : Green LED, power on the right that is shiny ;

-Touch area : Similar to a fingerprint icon inside the area , you can touch the  trigger finger .

-Positioning holes : 4 M2 screws positioning hole diameter is 2.2mm, the  positioning of the module is easy to install , to achieve inter- module  combination 

 Download


Shipping

    Fast Australia Wide Shipping 
    Processing is 1 Business Day. In most cases orders paid before 2PM AEST on a business day will ship the same day.
    Items are shipping from Melbourne, Victoria
    You are responsible for providing a current and valid address.

Payment

    Only Paypal is accepted as payment.The easiest way to send and accept payments. We will process your order once payment has been confirmed in our account.
    If you are unhappy with the item for ANY reason within the first 14 days, we offer you a full money back guarantee (minus post and packing) after we have recieved the returned item. Contact us should this occur.

TIP 223B DIGITAL TOUCH SENSOR

Price:
$9.75
SKU:
TIP2238
Share:
Quantity:


Product Description

TTTP223B Digital Touch Sensor Capacitive Touch Switch Module Raspberry Pi Arduino


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!