Kinsten 150 x 300 Single Sided Phenolic PCB
150 x 300mm Phenolic PCB, 1oz copper, positive presensitized, 1.6mm thick
Kinsten manufacture the positive resist coated printed circuit board (PCB) for many prototyping, educational and low volume applications. Even some high volume applications have used Kinsten PCB to keep the full process secure and in-house.
Phenolic substrate PCB is particularly suitable for less demanding applications. Kinsten only supply it with 1oz copper cladding on one side. The phenolic substrate is coloured brown, and is commonly seen in older electrical equipment. It is easier to cut and drill compared to fibre-glass PCB
However, it is not as robust, and is not suitable for use in situations where vibration or flexing is present. Care in soldering is recommended, as excessive soldering temperature or times can lead to charring more readily than fibre-glass substrate.
The positive resist has good exposure latitude and can produce very detailed track layouts when a suitable artwork and processing is used.
These Kinsten PCBs are one of the easiest and most economical ways to produce a PCB circuit at home.
Product Details
- Positive acting Presensitized PCB (Kinsten brand)
- High Sensitive photo resist coated
- Short exposing time: 60-90 seconds
- Color varied after exposure
- Store in cool dry area
- Single Sided
- Phenolic
-150 x 300 x 1.6 mm
Posted by Bernard Snoodyk on 14th Dec 2017
Great product just as it should be. consistent coating for a perfect circuit etc
Posted by Lindsay George on 20th Nov 2013
These boards give fine detail, are easily drilled and cut.
Exposure is a breeze with great latitude
The tracks are substantial in thickness and there is no "bleeding using the Kalex developer
Lindsay George (Victoria)